| The S1 model is self-operated bellows sealed pressure excess valve.
Fluids :Liquids, compressed air, neutral gases and steam. Regulation range : from 100 mbar to 15 bar eff. Sizes : DN15 à DN200 Connections : ISO or ANSI PN16-PN40 Materials : Trim material stainless steel AISI 304 ; body material in nodular Iron, Carbon steel or Stainless steel. Some other type of pressure excess valves (BSP, NPT, ISO or ANSI flanged, for liquid, gas, steam…) may reach your need, feel free to contact us. |
|
Category: Pressure regulator for steam
-
Excess Pressure Valve S1
-
Pressure regulator for steam – Flanged – M1
The M1 model is self-operated bellows sealed pressure regulator valve. This series of regulators is suitable for steam, compressed air, non-hazardous gases and liquids. This pressure regulator does not require any auxiliary energy.
Application :steam, compressed
air, non-hazardous gases and liquidsRegulation range : 100 mbar to 16 bar eff.
- 100 mbarg to 1,5 barg.
- 1 to 3 barg.
- 2 to 5 barg.
- 4 to 8 barg.
- 7 to 16 barg.
Diameters : DN15 to DN100 (up to DN200 on request)
Flange :
- EN 1092 PN16-PN40
- ANSI 150 / 300 lbs
Materials : Trim Stainless steel AISI 304, body in ductile iron, carbon steel or stainless steel.
Other configurations :
- Kv or CV reduced
- A control line kit for pressure tapping directly at the body is available on request (optionally with or without condensation tank) for set points > 1 bar.
- Condensation tank (pot) is available and necessary for steam or fluid upper to 125 ºC, to protect the diaphragm against excessive temperature.
Fill free to download the pdf file and to contact us by clicking on icons.
-
Pressure regulator for steam – threaded – PRV44
PRV44 model is a self-actuating pressure reducing valve balancing by bellow used to provide a constant downstream still there being oscillation in upstream pressure. Application :Steam, compressed air, neutral gaz and liquids.
Outlet pressure range : 0,2 to 8 barg with the same spring.
Maximum inlet pressure : 16 barg
Maximum temperature : +210 °C
Connections :
- 1/2″, 3/4″, 1″
- BSP, NPT threaded
- DIN / ANSI flanges
- Clamp, consult us
Material : Body and trim in stainless steel AISI 316
ATEX 94/9/CE
Fill free to download the PDF file, the technical form and to contact us by clicking on icons.
