Monoblock Combination Air Valve – 9400

Combination Air Valve for Wastewater (trifunction) type 9400 compact is specially designed for clean water.

It automatically performs the following three functions:

  1. Evacuation of large quantities of air during the filling. The kinetic air/vacuum valves are specially designed so that the flow of air in evacuations reaches high velocity ( speed of sound) without the Buoy ascending for the effect of the current and stopping any premature closings until the evacuation is complete.
  2. Purge of air during operation
  3. Admission of large quantities of air during the emptying and draining.

Closes watertight from 0.1 bar

Connexions : threaded or flanges (cf. table)

DN : 25 to 300

Range : PN10 or PN16

Material :

  • Body and Cover: Ductile Iron EN GJS-500-7
  • Float ball and Internal Mechanisms: Stainless steel A316
  • Coating: Non-toxic Epoxy for drinkable water. Internal and external 200 microns thickness

Fill free to download the pdf file and to contact us by clicking on icons.

9420 for waster water
9400 with flange

Download PDFDownload technical formContact us

9400_fonction_Fr_380x250
Operation

Other material/connexions and special coating available upon request

Bifunctionnal Air-Vacuum Valve – 9300

The Bifunctional Air Vacuum Valve type 9300 is a automatic bi-functional valve for clean water and full bore with only one body being the entry and the exit equal to the DN specifications.

The valve should perform the following functions.

  1. Evacuation of large quantities of air during the filling.The kinetic air/vacuum valves are specially designed so that the flow of air in evacuations reaches high velocity ( speed of sound) without the Buoy ascending for the effect of the current and stopping any premature closings until the evacuation is complete.
  2. Admission of large quantities of air during the emptying and draining.

Closes watertight from 1 bar

Connexions : threaded or flanges (cf. table)

Range : PN10, PN16 and PN25

Materials :

  • Body and Cover: Ductile Iron EN GJS-500-7
  • Float ball and Internal Mechanisms: Stainless Steel A304 (optional A316)
  • Coating: Non-toxic Epoxy for drinkable water. Internal and external 200 microns thickness

Fill free to download the pdf file and to contact us by clicking on icons.

Several models exist (threaded, flanged, with different floater …) for clean water, sea water, waste water, etc., do not hesitate to contact us to discuss your needs.

9300

Download PDFDownload technical formContact us

Test pressureBodySeat
PN1015 barg11 barg
PN1624 barg18 barg
PN2538 barg28 barg

DN1"252"DN50
DN60/65
DN80
DN100
DN150
DN200
DN250
DN300
DN350
DN400
ConnectionBSPFlangeBSPFlangeFlangeFlangeFlangeFlange

9300_fonction_Fr_400x230
Operation

Several models exist (threaded, flanged, with different floater …) for clean water, sea water, waste water, etc., do not hesitate to contact us to discuss your needs.

Combination Air Valve for Wastewater – 9420

La Combination Air Valve for Wastewater (trifunction) type 9420 compact is specially designed for wastewater.

It automatically performs the following three functions:

  1. Evacuation of large quantities of air during the filling. The kinetic air/vacuum valves are specially designed so that the flow of air in evacuations reaches high velocity ( speed of sound) without the Buoy ascending for the effect of the current and stopping any premature closings until the evacuation is complete.
  2. Purge of air during operation
  3. Admission of large quantities of air during the emptying and draining.

Closes watertight from 0.1 bar

Connexions : threaded or flanges (cf. table)

Range : PN10 or PN16

Material :

  • Body and Cover: Ductile Iron EN GJS-500-7
  • Float ball and Internal Mechanisms: Stainless steel A316
  • Coating: Non-toxic Epoxy for drinkable water. Internal and external 200 microns thickness

Fill free to download the pdf file and to contact us by clicking on icons.

9420 for waster water

Download PDFDownload technical formContact us

9400_fonction_Fr_380x250
Operation

Other material/connexions and special coating available upon request

Slow Closing Valve – Anti Slam – 2840 – Clean water

The slow closing valve is recommended to be installed at the air valve inlet during the filling.

The design prevents the valve from slamming when closed which can cause “water hammer” and the resultant noise and damage to piping systems.

If the liquid speed is above 3 mt per second, the water hammer and therefore the float against the seat can easily damage the valve. The same happens to deep well turbine pumps where the speed is too high and can easily exceed 3 mt. per second.

Connection : flange – DN80 to DN400

Range : PN10, PN16 et PN25

Materials :

  • Body: Ductile Iron EN GJS-500-7
  • Internal Mechanisms: Stainless steel and bronze
  • Seat: Elastomer NBR/EPDM of high durability
  • Coating: Non-toxic epoxy for drinkable water. Internal and External 200 microns thickness

Fill free to download the PDF file, the technical form and to contact us by clicking on icons.

Some other type of slow closing valve for clean, sea and processed crude water may reach your need, feel free to contact us. 

2840

Télécharger le PDFTélécharger le formulaire techniqueNous contacter

Test pressureBODYSEAT
PN1015 barg11 barg
PN1624 barg18 barg
PN2538 barg28 barg

2840_coupe
Operation

Some other type of slow closing valve for clean, sea and processed crude water may reach your need, feel free to contact us.

Strainer / Water strainer

Description :
Strainer for high performance results with vertical screen designed for maximum protection and prevent damages of control valves and water pipelines by means of the efficient removal and retention of solids, debris and other foreign material from flowing water. Either the construction materials and the general design of the Fig. 2012 strainer do obtain a final product very robust, durable and reliable.

Installation :
Its vertical opening allows easier installation in the network and is further facilitated with the use of lower clamps.

Diameters / Flange connexions  : 

DN50-DN350 / PN10-PN16-PN25

Available diameters, up to DN1000 Welded steel on request.

Range : PN10, PN16 et PN25

Material :

  • Body: Ductile iron GJS500-7
  • Cover: Carbon steel
  • Screen: Stainless steel A304
  • Bolting: Stainless steel A-2
  • COATING: Non-toxic epoxy for drinkable water. Internal and external 200 microns thickness.

Fill free to download the pdf file and to contact us by clicking on icons.

Strainer

Download PDFDownload technical formContact us

9400_fonction_Fr_380x250

Vacuum breaker valve for water

Description :

The automatic air inlet valve (adductor valve) allows entrance and emissions of large quantities of air during pipe emptying or depressions in water pipelines.

These vacuum relief valves shall be normally closed by means of a spring and open automatically only when the system pressure become negative, falling to approximately 0,02 bar below atmospheric pressure.

The immediate admission of air into the system valve shall be assured by having 10% more inflow area than the inlet area of the valve, preventing then from vacuum and limiting the vacuum pressure to the one calculated for the system. The double-sealing design (metal-metal and resilient) provides a “drop-tight” shut-off.

The air inlet valve incorporates a stainless steel screen and steel hood to avoid the entry of foreign particles.

Diameters / Flange connexions : DN50-DN500 

Range : PN10, PN16 et PN25

Material :

  • Body : Ductile Iron EN GJS-500-7
  • Seat: Elastomer NBR/EPDM of high durability
  • Upper protection: Steel with screen in stainless steel.
  • Bolting: Internal in stainless steel A2 / External in galvanized steel
  • Coating: Non-toxic epoxy for drinkable water. Internal and external 200 microns thickness

Other material and special coating available upon request

Fill free to download the pdf file and to contact us by clicking on icons.

Vacuum breaker valve

Download PDFDownload technical formContact us

9400_fonction_Fr_380x250

Air release valve type 9100

La Ventouse simple Fonction type 9100 est spécialement conçue pour les services de traitement d’eau.

Elle assure automatiquement la fonction suivante :

Les systèmes de transmission de l’eau possèdent habituellement de l’air qui naturellement augmente et tend à s’accumuler dans les parties hautes de l’installation. Les poches d’air accumulées doivent être purgées au moyen de soupapes automatiques pour maintenir le système en bon état.

Pour évacuer cet air, la soupape de décharge d’air possède un mécanisme de flotteur et un mécanisme permettant d’ouvrir le bouchon de purge à la pression de service standard.

Pendant que le système d’eau est pressurisé, la vanne de purge d’air va travailler pour éliminer les poches d’air générées.

Connexion : filetée ou à bride (cf. tableau)

DN : 25 à 150

Gamme : PN10, PN16 et PN25

Matières :

  • Corps en fonte Ductile GJS-500-7
  • Internes en Inox 304 (Inox 316 en option)
  • Revêtement époxy non-toxique pour eau potable (200 µm)

Option en inox ou DUPLEX
Revêtement époxy certifié ACS disponible sur demande

Vous pouvez télécharger la fiche PDF, le formulaire technique et nous contacter en cliquant sur les icônes.

Plusieurs modèles existent (fileté, à bride, avec différent flotteur…) pour eau propre, eau de mer, eaux usées, etc, n’hésitez pas à nous contacter pour nous exposer votre besoin.

9100 filetée (existe à bride – cf. pdf)
9220 à bride

Télécharger le PDFTélécharger le formulaire techniqueNous contacter

9100_fonction
Fonctionnement

Plusieurs modèles existent (fileté, à bride, avec différent flotteur…) pour eau propre, eau de mer, eaux usées, etc, n’hésitez pas à nous contacter pour nous exposer votre besoin.

Check valve

Les vannes anti-retour à disque sont conçues pour se fermer automatiquement et empêcher le retour de fluides. La vanne s’ouvrira lorsque la pression en amont dépassera la pression en aval de seulement 0,2 bar. Le ressort interne provoquera la fermeture de la vanne avant le moment où les pressions des deux côtés du disque s’égalisent, provoquant une fermeture en douceur et sans vibrations. La vanne anti-retour Fig. 288 est tout indiquée pour compenser les possibles coups de bélier et ainsi protéger les réseaux d’eau.

Connexion :à brides

DN : 50 à 1000

Gamme : PN10-16-25-40-64-100 EN 1092-1 ou Classe 150-300-400-600 ANSI B16.5/B16.47

Matières :

  • Corps en fonte Ductile GJS-500-7
  • Disque de fermeture: Acier inoxydable A304 jusqu’à DN350; Acier au carbone + Acier inoxydable A304 à la zone de fermeture à partir de DN400
  • Siège et axe en Inox 304
  • Culots: Bronze Rg5
  • joint de clapet: Élastomère NBR/EPDM
  • Ressort: Acier inoxydable A303
  • Revêtement époxy non-toxique pour eau potable (200 µm)

Options :

    • Inox ou DUPLEX

Vous pouvez télécharger la fiche PDF, le formulaire technique et nous contacter en cliquant sur les icônes.

Autres matériaux et recouvrements disponibles sur demande., n’hésitez pas à nous contacter pour nous exposer votre besoin.

Clapet anti-retour

Télécharger le PDFTélécharger le formulaire techniqueNous contacter

Exemples de réalisation :

Clapet anti retour DN600
Clapet anti-retour DN600 – 600 lbs

Double eccentric butterfly valve for water

Les vannes papillon sont des vannes d’isolement (ON – OFF) qui peuvent être installées horizontalement ou verticalement.
Le type de connexion peut être à double brides ou type wafer (sandwich).
La conception du disque a été prévue pour résister à une pression différentielle maximale dans les deux sens de circulation.
Le disque est conçu pour obtenir la plus faible résistance possible à l’écoulement et pour avoir le minimum de vibrations durant les opérations d’étranglement.
Principaux domaines d’applications :
– Systèmes d’eaux municipales
– Les réseaux d’approvisionnement en eau potable
– Les usines de traitement de l’eau
– Dans les conduites sous pression des centrales hydroélectriques et pour les fermetures en cas d’urgence.

Connexions :à brides, type wafer (sandwich)
DN : 200 à 2000
Gamme :
PN10-16-25-40-64-100 EN 1092-1 ou Classe 150-300-400-600 ANSI B16.5/B16.47

Matières suivant le DN :

  • Corps : fonte Ductile EN-GJS-450-10 jusqu’au DN500; acier GGG50 et acier inoxydable A304 jusqu’au DN2000
  • Disque de fermeture: fonte Ductile EN-GJS-450-10 jusqu’au DN500; acier GGG50 et acier inoxydable A304 jusqu’au DN2000
  • Axe : Acier inoxydable
  • Bague de retenue: Acier inoxydable
  • Joint : Élastomère NBR ou EPDM
  • Palier lisse: Aluminium / Bronze
  • Levier manuel: Fonte BS 2789
  • Revêtement époxy non-toxique pour eau potable (300 µm) Agrée FDA ou AWWA C213-79

Essais hydrauliques selon DIN 3840:
Pression d’épreuve du corps: 1,5 fois la pression nominale du corps
Test de fuite de siège: 1,1 fois la pression nominale du corps

Accessoires :

– Axe d’extension
– Différents types de réducteurs, actionneurs électriques ou hydrauliques
– Préparé pour le by-pass
– Préparé pour la téléconduite
– Matériaux spéciaux pour les applications avec l’eau de mer, etc. (DUPLEX, inox)

Types d’actionneurs :
· Actionneur électrique
· Actionneur hydraulique
· Actionneur pneumatique

Vous pouvez télécharger la fiche PDF, le formulaire technique et nous contacter en cliquant sur les icônes.

Autres matériaux et revêtements disponibles sur demande, n’hésitez pas à nous contacter pour nous exposer votre besoin.

vanne papillon excentrique pour eau
9220 à bride

Télécharger le formulaire technique
Télécharger le PDF
Nous contacter

Vanne papillon montage
Exemple avec options